The QSFP28/QSFP56 Host Compliance Board (HCB) test fixture and our Module Complaince Board (MCB) test fixture supports 100Gbps using NRZ signaling or 200Gbps using PAM4 signaling.

The module compliance board (MCB) enables the serial communication between the bit error rate (BER) tester and the optical transceiver. Due to the ever-increasing bandwidth demand of hyperscale data centers, the transition to 400G Ethernet is now in full swing...

The module compliance board (MCB) enables the serial communication between the bit error rate (BER) tester and the optical transceiver. Due to the ever-increasing bandwidth demand of hyperscale data centers, the transition to 400G Ethernet is now in full swing...

400G QSFP-DD HOST COMPLIANCE BOARD Features： 8 of 16 Differential Lanes [TX1,TX2,TX3,TX4] [RX1,RX2,RX3,RX4]QSFP-DD MSA Hardware SpecificationSTANDARDS: IEEE802.3cd Mated Test Fixture SpecificationsIEEE802.3bj, IEEE802.3bm,IEEE802.3bs,and IEEE802.3cd compliantConnectors: 2.92 mm (SMA compatible) Calibration traces    Allow accurate de‐embedding of test fixtureOn‐board EEPROM    Emulates optical module...

FeaturesSupports 8x50G interfaces• I2C master driven from both on board microcontroller or external pin headers• 40 GHz 2.92 mm K Connectors• Current Sense• Matched differential trace length• All 8 channels come with matching trace length• High performance signal integrity traces from K connectors...

This QSFP112 Test Board is designed to provide an efficient and easy method of testing 400G QSFP112 transceivers, active cables, and customizing QSFP112 electric loopbacks. Features Supports 4x112Gbps interface 67GHz 1.85mm female Solderless Connectors Connector Durability:500cycles minimum Switch control (MODSElL,ResetL,LPMODE)...

The module compliance board (MCB) enables the serial communication between the bit error rate (BER) tester and the 400G OSFP transceiver. Due to the ever-increasing bandwidth demand of hyperscale data centers, the transition to 400G Ethernet is now in full...

The 100G QSFP28 module compliance board (MCB) enables the serial communication between the bit error rate (BER) tester and the 100G QSFP28 optical transceivers. Product Features Supports 4x25Gbps interface 40GHz 1x8 Multi-coaxial Connectors Connector Durability:250cycles minimum DDMI Connection(I2C) All 8...

MMPX male to SMA male RF Cable Assembly 0.5m; DC~18GHz VSWR <1.25 to 18 GHz 18GHz MMPX Male to SMA Male High-frequency RF cable is a cable used to transmit high-frequency signals, often used in radio, microwave and other high-frequency...

OTDR lanuch cable are designed to be used in conjunction with an OTDR to measure complete link loss of a fiber. They are also known as pluse suppressor cables, lanuch cords, launch leads, receive cables or fiber rings. An OTDR...

OTDR Fiber Optic Connector LC/ST/FC/SC For Optical Time Domain Reflectometer Fiber Adapter Features Apply for CATV, LAN, Telecom network, test equipment, SC connectors Simplex / Duplex Sleeve Socket Material: Zirconium dioxide ceramic Specification Applicable Fiber Type: SM 9/125 Fiber Insertion...

This OTDR is for evaluating FTTx and access network construction and maintenance, identifying fiber breakpoints, measuring cable length, and calculating relative optical power losses. Features Simple optical fiber obstacle finder, can find breakpoint, distance, attenuation Function can test two display...

This OTDR is for evaluating FTTx and access network construction and maintenance, identifying fiber breakpoints, measuring cable length, and calculating relative optical power losses. Features Simple optical fiber obstacle finder, can find breakpoint, distance, attenuation Function can test two display...

This 10G XGPON Optical Power Meter is used to measure optical power of downstream signal of 1490nm, 1550nm and 1577nm in 10G EPON/XGPON and RF network. This optical power meter with separated wavelengths 1490/1550/1577nm are mainly used for the installation,...

This CWDM optical power meter is a CWDM optical network channel detector. It is mainly used to measure and monitor the power of 18 CWDM wavelengths. The test power value can  be displayed  in column graph or list mode, and...

Automatic MPO/MTP Continuity Tester is a kind of intellectualized product to analyze fiber optic patch cords sequence and judge break fiber optic patch cords In the process of the production of MPO/MTP fiber optic patch cords. The tester adopts the...

The Pen Shape Visual Fault Locator (VFL) is a robust, cost-effective fiber optical cable test tool for locating faults within OTDR dead zones. As a visual fault identifier (VFI), it can quickly identify faults in fiber optic jumper cables, distribution...

This Fiber Identifier can quickly identify the direction of transmitted fiber and display the relative core power without any damages to the fiber. When the traffic is present, the intermittently audible tone is activated.The optical fiber identifier also recognize the...

This Power Meter provides highly accurate power measurements, as well as reference value setting capabilities. What’s more, this convenient unit requires no offset nulling, and it offers power autonomy of 55 hours, for reliable, long-lasting performance in the field.Features 2.5mm...

Singlemode and Multimode Optic fiber tester light source 850/1300/1310/1550nm FTTx Hand-held Fiber Cable Test tools with SC+FC connectorThis Light Source provides excellent stability and high measurement accuracy for up to two single mode wavelengths or two multimode wavelengths. It is...